Texas Lantana

Sold Out

Ships 1-3 days*

Size
$38.00

$1500+, SAVEMORE20 for 20% off
$3000+, SAVEMORE30 for 30% off
$7000+, Contact our sales team

For questions on bulk order discounts
Please contact us at sales@simplytrees.com

 

Texas Lantana is a resilient, flowering shrub known for its vibrant, multicolored blooms that attract butterflies and hummingbirds. Its ability to tolerate heat and drought makes it a great choice for adding continuous color to your garden or landscape.

  • Botanical name: Lantana urticoides
  • Bloom time: Summer to fall
  • Evergreen in warmer climates; Deciduous in cooler climates
  • Grown in the USA

SUNLIGHT:
Prefers full sun

WATER:
Water when the top 1-2 inches of soil are dry. Approximately every 1-2 weeks. Watering frequency may vary based on climate and establishment phase.

IDEAL CLIMATE:
Hardy in USDA Zones 7-11; thrives in warm, sunny climates with well-draining soil

Note: Texas Lantana can spread rapidly and may benefit from periodic pruning to control its growth and promote a fuller appearance.

PLANT DESCRIPTION & MATURE SIZE

The Texas Lantana, scientifically known as Lantana urticoides, is a robust and colorful perennial that thrives in warm climates. Known for its clusters of bright orange, yellow, and red flowers, this drought-tolerant plant is a magnet for butterflies and hummingbirds. Ideal for xeriscapes, rock gardens, and borders, Texas Lantana is celebrated for its ability to flourish in poor soils and its minimal water needs.

GROWTH RATE & MATURE SIZE:

Fast growth rate; typically reaches 2-4 feet in height and can spread to 3-5 feet in width.

WATERING & SUNLIGHT

Water regularly during the first growing season to establish a deep root system. Once established, Texas Lantana is highly drought-resistant and only requires occasional watering during extended periods of dry weather. Requires full sun to flourish, meaning at least 6-8 hours of direct sunlight daily, which is crucial for optimal flowering and growth.

PLANT CARE & PLANTING INSTRUCTIONS

Pruning: Regularly deadhead spent flowers to encourage continuous blooming. In late winter or early spring, prune back hard (about six inches above the ground) to encourage new growth and a more compact form.

Fertilization: Feed with a general-purpose fertilizer in the spring before the new growth begins. Over-fertilizing can lead to more foliage and fewer blooms.

Winter Protection: In cooler parts of its range (zones 7-8), it may die back in winter but will return in spring. Consider applying a light layer of mulch around the base to protect the roots in the colder months.

PLANTING INSTRUCTIONS:

Choose a location that receives full sun and has well-draining soil. Dig a hole as wide and slightly deeper than the root ball. Place the plant in the hole, backfill with soil, water thoroughly, and apply a layer of mulch to help retain soil moisture and suppress weeds. Space plants about 2-3 feet apart to allow for their mature spread.

USDA GROW ZONE:

Zones 7-11

Lantana urticoides, also known as Texas Lantana, flourishes in USDA Zones 7-11, indicating its preference for warmer climates. In these zones, it proves to be both heat and drought-tolerant once established. Especially prolific in its blooming in zones 9-11, it remains semi-evergreen, making it a year-round attraction.

Frequently Asked Questions

Texas Lantana, known for its vigorous growth, typically reaches a height of about 2 to 4 feet and can spread out 3 to 5 feet wide. Its sprawling habit makes it an excellent choice for ground covers, spreading quickly to fill in areas with vibrant color. The size and spread can vary based on growing conditions and how much it is pruned. Regular pruning not only helps control its size but also encourages a denser and more attractive growth pattern, enhancing its flower production. Given its robust nature, Texas Lantana is ideal for gardeners looking for a low-maintenance plant that can cover large areas efficiently.

Texas Lantana grows quite rapidly under the right conditions. It's known for its ability to spread quickly and establish itself in a variety of settings. In a single growing season, Texas Lantana can expand significantly, often covering a sizable area if not restricted.

Under optimal conditions, which include full sun, well-drained soil, and adequate moisture, Texas Lantana can grow several feet in both height and width within a season. This fast growth rate makes it an excellent choice for quickly filling in garden spaces, creating vibrant ground covers, or adding splashes of color to landscape borders. However, its vigorous nature also means it may require regular pruning to keep it within bounds and maintain a neat appearance.

The best place to plant Lantana involves selecting a location that meets several key requirements to optimize its growth and flowering. Here are the factors to consider:

Sunlight: Lantana thrives in full sun, so choose a spot that receives at least 6-8 hours of direct sunlight each day. Full sun exposure is crucial for the plant to produce vibrant flowers and maintain healthy growth.

Soil: Lantana prefers well-draining soil. It can tolerate a range of soil types, including sandy and slightly rocky soils, as long as they drain well. If your garden soil tends to hold moisture, consider improving drainage by adding organic matter or creating a raised bed.

Space: Ensure there is enough room for the Lantana to spread. Depending on the variety, Lantana can grow 1 to 3 feet tall and 2 to 4 feet wide. Adequate spacing will help prevent overcrowding and reduce the risk of disease.

Air Circulation: Good air circulation is important for preventing fungal diseases. Avoid overly crowded planting locations where air movement is restricted.

Accessibility: Plant Lantana in areas where you can easily access it for maintenance tasks such as watering, pruning, and deadheading.

Aesthetic Considerations: Consider the visual impact of Lantana's vibrant flowers. Planting it along walkways, in front of garden beds, or near outdoor living spaces can enhance the aesthetic appeal of your yard.

Protection from Wind: While Lantana is quite hardy, in very windy locations, it's beneficial to provide some shelter to prevent damage to the plant and to aid in pollination.

By carefully selecting the location based on these criteria, you will provide the best environment for your Lantana to flourish, showcasing its colorful blooms and lush foliage throughout the growing season.

When planting Lantana, the spacing is important to ensure healthy growth and allow for adequate air circulation, which helps prevent disease. Here’s how to determine the ideal spacing:

Mature Size: Consider the mature spread of the Lantana variety you are planting. Most common Lantana varieties grow to be about 1 to 3 feet tall and can spread 2 to 4 feet wide.

Spacing for Individual Plants: If you're planting individual Lantana plants for a garden bed or border, space them about 2 to 3 feet apart. This spacing allows each plant enough room to reach its full size without overcrowding.

Spacing for Ground Cover: If you're using Lantana as a ground cover or for mass planting, you can space them closer, about 12 to 18 inches apart. This allows the plants to fill in the area more quickly, creating a dense mat of foliage and flowers.

Spacing for Containers: When planting Lantana in containers, make sure the pot is large enough to accommodate the plant’s root ball with some extra space for growth. Generally, a single Lantana plant per 12 to 18-inch diameter pot is sufficient.

Proper spacing not only helps with the aesthetic layout of your garden but also ensures that the Lantana has enough room to grow healthily, maximizing air flow and reducing the risk of fungal diseases.

Caring for Lantana involves a few straightforward practices that ensure healthy growth and abundant flowering. Here’s how you can take care of your Lantana effectively:

Sunlight: Lantana thrives in full sun, requiring at least 6-8 hours of direct sunlight daily. This exposure is crucial for optimal flowering.

Watering: Water newly planted Lantana regularly to help establish its roots, about every two to three days, depending on weather conditions. Once established, Lantana is drought-tolerant. Water it once a week during dry spells, less frequently if it rains or if the weather is cool.

Soil: Plant Lantana in well-draining soil. It tolerates a range of soil types but does best in slightly acidic to neutral pH soils. Poor drainage can lead to root rot, so ensure the planting site or potting mix is free-draining.

Fertilization: Feed Lantana lightly; over-fertilization can decrease its flower production. Use a balanced, slow-release fertilizer in the spring and perhaps again in mid-summer to promote vigorous growth and flowering.

Pruning: Prune Lantana in early spring to remove old growth and encourage bushy, new growth. You can also prune it lightly during the flowering season to maintain its shape and encourage continued blooming.

Deadheading: Although not strictly necessary, removing spent blooms can help encourage more flowers and prevent the plant from self-seeding, especially in regions where Lantana is considered invasive.

Winter Care: In areas where Lantana is not hardy, treat it as an annual or bring it indoors during the winter. In milder climates, mulch around the base to protect the roots from freezing temperatures.

Pest and Disease Management: Keep an eye out for pests such as aphids and whiteflies. Lantana is also susceptible to powdery mildew and fungal diseases, especially in humid climates. Ensure good air circulation and avoid overhead watering to minimize these issues.

By following these care tips, your Lantana should be vibrant and floriferous, adding a splash of color to your garden or landscape.

Watering frequency for Lantana depends on several factors including climate, soil type, and plant maturity. Here are some general guidelines to help you determine how often to water your Lantana:

Newly Planted Lantana: For the first few weeks after planting, water your Lantana every two to three days to help establish its root system. The soil should be kept moist but not waterlogged.

Established Lantana: Once established, Lantana is quite drought-tolerant. It typically requires watering once a week during dry periods. In cooler climates or during rainy seasons, you might water less frequently.

Soil Type: Lantana prefers well-drained soil. In sandy soils, which drain quickly, you may need to water more frequently. In clay soils, which retain moisture longer, you may need to water less often.

Climate and Weather Conditions: In hot, dry climates, Lantana may need more frequent watering, especially if it's in full sun. During cooler weather or in areas with regular rainfall, reduce the frequency of watering.

Container-Grown Lantana: If your Lantana is in a pot, it will likely need more frequent watering than garden-planted Lantana, as soil in containers tends to dry out faster. Check the soil moisture regularly—potting soil should be allowed to dry out slightly between waterings.

Always check the soil moisture by feeling the soil a few inches below the surface before watering. Overwatering can lead to root rot and other problems, so it's important to ensure the soil isn't already moist. Adjust your watering schedule based on the specific needs of your plant and the environmental conditions.

Yes, deadheading Lantana can be very beneficial for the plant. Here are a few reasons why you might consider regularly removing spent blooms:

Promote Continuous Blooming: Deadheading encourages Lantana to produce more flowers. Removing the old blooms prevents the plant from putting energy into seed production, which can stimulate the growth of new flowers.

Improve Plant Appearance: Spent blooms can make Lantana look untidy. Removing them helps the plant maintain a cleaner, more vibrant appearance.

Prevent Self-Seeding: Lantana can be invasive in some areas, especially in warmer climates. Deadheading helps prevent the plant from spreading through self-seeding, keeping it confined to the desired area.

Promote Healthier Growth: By removing old and possibly diseased or pest-infested blooms, you can help prevent the spread of disease and reduce pest problems.

To deadhead Lantana, simply snip off the flower heads after they fade and before they begin forming seeds. You can use pruning shears or simply pinch them off with your fingers. Regular deadheading throughout the blooming season can help keep your Lantana looking its best and flowering prolifically.

Winterizing Lantana is important, especially in areas where it is grown as a perennial but experiences cooler winters (USDA Zones 7-8) or in borderline hardy zones. Here are steps you can take to help protect your Lantana through the winter:

Pruning: After the first frost, prune the Lantana back to about 6-12 inches above the ground. This helps to reduce the stress on the plant and prevents damage from decaying plant material.

Mulching: Apply a thick layer of mulch, such as straw or shredded leaves, around the base of the plant. This helps insulate the roots from extreme cold and helps retain soil moisture. The mulch layer should be several inches thick to provide effective insulation.

Watering: Before the ground freezes, give your Lantana a good watering. This is important because dry plants are more susceptible to cold damage. However, avoid overwatering as Lantana prefers well-drained soil.

Covering: In areas of severe cold, consider covering your Lantana with a frost blanket or burlap to provide additional protection during the coldest months. Remove the cover during warm spells to allow air circulation and prevent overheating.

Container Plants: If your Lantana is in a pot, consider moving it indoors or into a garage or basement where it is cool but frost-free during the winter months. If the pot must stay outdoors, wrap it with bubble wrap or burlap to help insulate the roots.

These steps can significantly enhance the survival rate of your Lantana through the winter, particularly in zones where the plant is on the edge of its cold hardiness range.

Whether your Lantana comes back after a freeze depends on the severity of the freeze and the specific variety of Lantana, as well as whether it's grown as a perennial or annual in your area.

In Warm Climates (as a perennial):
Lantana is quite hardy in USDA Zones 9-11, where it is grown as a perennial. In these zones, it can usually survive light freezes with minimal protection. The roots often survive even if the above-ground parts of the plant die back due to the cold. With proper mulching and care, the plant can regrow from the roots in spring.

In Colder Climates (as an annual):
In colder regions (below Zone 9), Lantana is often treated as an annual because it does not typically survive harsh winter conditions. If exposed to prolonged freezing temperatures and frost, the plant is unlikely to come back in the spring.

Protection Tips:
Mulching: Apply a thick layer of mulch around the base of the plant to protect the roots from freezing temperatures.
Covering: If a light freeze is expected, you can cover the plants with frost cloth or another form of insulation to help shield them from cold wind and frost.
Pruning: After the threat of frost has passed in the spring, prune back any dead material. This can stimulate new growth if the roots have survived.

Recovery:
If you're in a borderline area where Lantana might survive winter, give the plants some time in the spring. They can be slow to show new growth as temperatures warm. If you don't see new shoots by late spring, it's likely the plant didn't survive the winter.

Yes, cutting back your Lantana in the fall is a good practice, especially in regions where Lantana acts as a perennial. Here’s why and how to do it effectively:

Encourage New Growth: Trimming Lantana back in the fall helps to encourage vigorous new growth in the spring. It rejuvenates the plant by removing old growth that may no longer be productive.

Shape the Plant: Cutting back can also help maintain a more compact, tidy shape and prevent the Lantana from becoming too leggy.

Health Reasons: Trimming helps remove any diseased or damaged parts of the plant, reducing the likelihood of problems persisting or worsening over the winter.

Timing: In colder regions, wait to prune until after the first frost if the plant is still blooming, as Lantana can continue to provide color into the fall. In milder climates, you can prune earlier if growth has slowed or stopped.

How Much to Cut: You can safely cut back Lantana to about one-third of its current size. If it has grown particularly large or unruly, some gardeners will cut it back even further, but always leave several inches of stem with some leaves if possible, to ensure it can recover robustly.

Additional Care: After cutting back, mulch around the base of the plant to help protect the roots over the winter, especially in areas where winters are harsh.

This fall pruning will help ensure your Lantana comes back healthy and vibrant in the spring.

More Details

We process and ship your order as quickly as possible, typically within 1-3 business days. You will receive a shipping confirmation with tracking information once your item(s) ship.

We have perfected packaging and shipping plants & trees! That is why we DO NOT use any third-party fulfillment like most other online retailers. Your trees go straight from our farm to your door, safely packaged by our team of seasoned professionals. Our process ensures your plants leave our facility and arrive to your door in the best condition possible!

In cases of extreme cold or hot weather, we may temporarily delay shipping to ensure the well-being of your plants. Our primary focus is on delivering healthy and thriving plants to you. Rest assured, we'll make every effort to notify you of any delays promptly.

Please allow additional ship times during inclement weather and sale periods. We do not process or ship orders on the weekend or U.S. Holidays. Simply Trees is not responsible for delays due to carriers, local disruptions, or weather.

See how we pack your plants!

Learn more about our Shipping Policy

At Simply Trees, we're committed to your satisfaction. If your plants arrive considerably damaged or sustained damage beyond the point of recovery, please contact us within five days at sales@simplytrees.com with clear photos of the entire plant in question for assistance. Our 30-day guarantee covers issues after planting, subject to our terms and conditions. We can't cover plants in the wrong climate or with inadequate care, but we're here to help in other situations. For a detailed understanding of our 30-day guarantee and how we ensure a fair process, click here to learn more.

What's inside?

Your order from Simply Trees is more than just a box of plants—it’s a carefully curated experience. Here’s what’s inside:

  • We hand-select our plants for premium-quality from top growers nationwide
  • Each plant is then cleaned, prepped, and pruned to remove any blemishes and encourage new growth
  • Expertly treated and inspected for preventative measure
  • The pot is wrapped in a durable plastic bag and secured with a zip tie; house plants get extra protection with a recyclable nursery bag
  • Your plant is strapped into our durable double-pane boxes, secured in place with a heavy-duty zip tie to ensure safe transit
  • A thank you card with a QR code leads to our guide on welcoming your new plants home

We take pride in making sure every detail is just right, so you can enjoy your new greenery from the moment it arrives.

Sustainable shipping, quality care

We've perfected the art of packaging and shipping plants and trees! Unlike most online retailers, we handle everything in-house—no third-party fulfillment. Our experienced team carefully packages your plants to ensure they arrive from our farm to your door in perfect condition.