Purple Crape Myrtle Tree (Muskogee)

Muskogee Crape Myrtles are a popular cultivar known for their stunning lavender-purple blooms and attractive growth habit. Here are some details about their typical height, growth rate, and time to reach maturity:

Mature Height: Muskogee Crape Myrtles can reach a mature height of approximately 15 to 20 feet with a similar spread. However, their height can vary somewhat depending on local growing conditions, pruning practices, and specific environmental factors.

Growth Rate: These crape myrtles have a moderate to fast growth rate. On average, they can grow anywhere from 1 to 3 feet in height per year under favorable conditions.

Time to Reach Maturity: It typically takes Muskogee Crape Myrtles several years to reach their mature height and width. They will start producing significant blooms within the first few years after planting, but it may take 3 to 5 years or more for them to approach their full mature size. Factors such as soil quality, sunlight, and local climate can influence the rate of growth.

Proper care, including regular watering, fertilization, and pruning, can help your Muskogee Crape Myrtles reach their full potential in terms of size and beauty. Keep in mind that while they can be pruned to maintain a specific size and shape, allowing them to grow naturally can showcase their elegant vase-like form and maximize their bloom production.

The best time of year to plant Muskogee Crape Myrtles or any crape myrtle variety is typically in the late winter to early spring or in the early fall. Here are some details about the best times for planting:

1. Late Winter to Early Spring (February to April):
Planting crape myrtles in late winter to early spring, just before new growth begins, is an excellent choice. This allows the plant to establish its root system before the onset of hot summer weather. By planting in late winter or early spring, you give the crape myrtle ample time to adapt to its new environment and potentially bloom in the same growing season.

2. Early Fall (September to October):
Early fall is another suitable planting time for crape myrtles, as the weather begins to cool down and there is less heat stress. Planting in early fall provides a window for root establishment before winter dormancy, allowing the plant to be well-prepared for the following spring.

While these are the optimal times for planting crape myrtles, you can also plant them during other parts of the growing season if necessary. However, avoid planting during the hot summer months when the plant may experience stress due to high temperatures and dry conditions.

When planting Muskogee Crape Myrtles or any crape myrtle variety, follow these general planting guidelines:

Select a Suitable Location: Choose a planting site with well-draining soil and full sun to partial shade. Ensure there is enough space for the mature size of the crape myrtle.

Prepare the Soil: Amend the soil with organic matter to improve drainage and fertility. Crape myrtles thrive in slightly acidic to neutral soil.

Dig a Proper Hole: Dig a hole that is as deep as the root ball but at least two times wider. This provides ample room for the roots to spread.

Plant at the Right Depth: Set the crape myrtle in the hole so that the top of the root ball is level with the surrounding soil surface.

Backfill and Water: Fill in the hole with soil, tamp it down gently, and water thoroughly to settle the soil and eliminate air pockets.

Mulch: Apply a layer of mulch around the base of the plant to conserve moisture, regulate soil temperature, and suppress weeds.

Water Regularly: Keep the soil consistently moist, especially during the first year after planting, to help the crape myrtle establish its root system.

By planting crape myrtles at the right time of year and providing proper care, you can enjoy their beautiful blooms and attractive growth habit in your landscape.

Muskogee Crape Myrtles are known for their long and prolific blooming season. These crape myrtles typically begin to bloom in late spring or early summer, and their stunning lavender-purple flowers can last well into the fall season, often persisting for up to 100 days or more under favorable conditions.

The exact duration of the bloom period can vary depending on several factors, including local climate, weather conditions, and the specific growing environment. Here are some key points to consider regarding the bloom duration of Muskogee Crape Myrtles:

Extended Blooming Season: Muskogee Crape Myrtles are prized for their extended blooming season, which sets them apart from many other flowering shrubs and trees. They often start blooming in late spring or early summer and continue to produce new flowers throughout the summer months.

Deadheading: To prolong the bloom period and encourage continuous flowering, you can deadhead (remove spent blooms) throughout the season. Deadheading helps redirect the plant's energy toward producing new flower buds.

Climate and Weather: The length of the bloom period can be influenced by local climate conditions. In areas with mild, warm summers, Muskogee Crape Myrtles may have a more extended blooming season compared to regions with hot, dry summers.

Proper Care: Providing proper care, including regular watering, fertilization, and pruning, can help ensure that Muskogee Crape Myrtles continue to produce blooms for an extended period.

Overall, Muskogee Crape Myrtles are valued not only for their striking flowers but also for their ability to provide an extended and colorful display in the landscape throughout the summer and into the fall months. Proper maintenance and care can maximize their bloom duration and overall health.

When planting Muskogee Crape Myrtles or any crape myrtle variety, it's important to consider their mature size and allow enough spacing between plants to ensure they have room to grow and thrive without becoming overcrowded. Here are some general spacing guidelines for
Muskogee Crape Myrtles:

Spacing for Single Trunk Trees:
If you intend to grow Muskogee Crape Myrtles as single trunk trees, space them approximately 10 to 15 feet apart from one another. This spacing allows for their mature canopy to develop without overcrowding.

Spacing for Multi-Trunk Shrubs:
For multi-trunk or shrub-like growth forms, you can plant them slightly closer together, typically about 5 to 10 feet apart. This spacing accommodates the development of multiple trunks while still allowing for adequate air circulation and growth.

Hedge Planting:
If you plan to create a crape myrtle hedge using Muskogee Crape Myrtles, space them closer together, approximately 3 to 5 feet apart. This will create a dense, uniform hedge.

Consider Mature Size: When determining the spacing, consider the mature width of Muskogee Crape Myrtles, which can reach approximately 15 to 20 feet for multi-trunk shrubs. Providing adequate space for their mature canopy helps prevent overcrowding and promotes healthy growth.

Future Pruning: Keep in mind that regular pruning may be necessary to maintain the desired shape and size of your crape myrtles, especially if they are planted in closer proximity.

Site Conditions: Ensure that the planting site receives the appropriate amount of sunlight and has well-draining soil, as these factors can influence the overall health and growth of the plants.

Proper spacing not only allows your Muskogee Crape Myrtles to reach their full potential but also helps prevent issues like overcrowding, reduced air circulation, and potential disease problems. Be sure to consider the desired growth form, location, and intended purpose of your crape myrtle planting when determining the spacing between individual plants.

Crape myrtles, including Muskogee Crape Myrtles, typically begin to bloom within the first 2-3 years after planting, usually in their second or third growing season. However, the exact timing of when crape myrtles start to bloom can vary based on several factors:

Age of the Plant: Young crape myrtle plants may take a bit longer to establish their root systems and allocate energy toward flowering. It's common for them to produce more significant blooms as they mature.

Growing Conditions: Favorable growing conditions, including adequate sunlight, proper soil preparation, and consistent watering, can encourage earlier blooming.

Cultivar Variability: Different crape myrtle cultivars may have varying bloom onset times. Some cultivars may start blooming earlier in their development than others.

Climate: Local climate and weather patterns can influence when crape myrtles begin to bloom. In warmer climates, they may bloom earlier in the growing season.

Pruning: Pruning practices can also impact flowering. Heavy pruning, especially during the growing season, can remove flower buds and delay blooming.

As a general guideline, you can expect your Muskogee Crape Myrtles to start producing significant blooms within the first 2 to 3 years after planting. To encourage earlier and more abundant flowering, provide optimal care, including proper watering, fertilization, and pruning. Once they begin blooming, these crape myrtles are known for their extended and colorful flowering season throughout the summer and into the fall.

The best place to plant Muskogee Crape Myrtles is in a location that provides them with the ideal growing conditions to thrive and showcase their vibrant lavender-purple blooms. Here are some key considerations for choosing the best planting site:

Sunlight: Muskogee Crape Myrtles require full sun to thrive and produce abundant blooms. Choose a location that receives at least 6 to 8 hours of direct sunlight each day. Insufficient sunlight can result in reduced flowering and overall growth.

Soil Quality: Select well-draining soil with good fertility. Crape myrtles prefer slightly acidic to neutral soil. Amending the soil with organic matter, such as compost, can improve soil structure and fertility.

Spacing: Ensure that you plant Muskogee Crape Myrtles with adequate spacing between each plant. This allows for proper air circulation, reduces the risk of disease, and prevents overcrowding as they mature. Refer to the recommended spacing guidelines based on your desired growth form (single trunk or multi-trunk shrub).

Protection from Wind: While crape myrtles are generally hardy, they can benefit from some protection against strong winds, especially in regions with severe storms. Planting them near structures or windbreaks can provide some shelter.

Avoid Low-Lying Areas: Avoid planting in low-lying areas where water may accumulate, as crape myrtles prefer well-drained soil. Poor drainage can lead to root rot and other health issues.

Adequate Air Circulation: Proper air circulation around the plants helps prevent fungal diseases. Avoid planting them in extremely tight or crowded spaces.

Aesthetics and Visibility: Consider the visual impact of your planting location. Muskogee Crape Myrtles are prized for their attractive form and colorful blooms, so choose a location where they can be prominently featured and enjoyed.

Accessibility: Ensure easy access to your crape myrtles for maintenance tasks such as pruning, deadheading, and fertilization.

Local Climate: Muskogee Crape Myrtles are suitable for USDA Hardiness Zones 7 to 9. Be sure to select a location that matches your local climate and provides the necessary winter protection if you live near the cooler end of their range.

Companion Planting: Consider the overall design of your landscape when choosing the planting site. You can complement Muskogee Crape Myrtles with other plants that thrive in similar conditions and create an appealing garden design.

By carefully selecting the right planting site that meets these criteria, you can help ensure that your Muskogee Crape Myrtles grow vigorously, produce abundant blooms, and enhance the beauty of your landscape.

If your Muskogee Crape Myrtle is not blooming, there could be several reasons for this issue. Crape myrtles are generally known for their prolific blooms, so when they don't flower, it's essential to address the potential causes. Here are some common reasons why crape myrtles may not bloom and solutions to consider:

Insufficient Sunlight:
Crape myrtles require full sun to partial shade to produce abundant blooms. Lack of adequate sunlight can result in reduced flowering.
Solution: Ensure that your crape myrtle is planted in a location where it receives at least 6 to 8 hours of direct sunlight each day.

Pruning at the Wrong Time:
Pruning crape myrtles at the wrong time, especially in late winter or spring, can remove flower buds and inhibit blooming.
Solution: Prune your crape myrtle immediately after flowering in late spring or early summer. Avoid heavy pruning during the growing season.

Over-Pruning:
Excessive or severe pruning can remove too much growth and reduce flowering potential.
Solution: Prune crape myrtles selectively and lightly to maintain their shape, and avoid removing more than one-third of the plant's canopy at a time.

Immaturity:
Young crape myrtles may take a couple of years to establish themselves before producing abundant blooms.
Solution: Be patient and provide proper care to help the plant develop and mature.

Nutrient Deficiencies:
Nutrient imbalances, particularly a lack of phosphorus or potassium, can affect flowering.
Solution: Fertilize your crape myrtle with a balanced, slow-release fertilizer formulated for flowering shrubs in the spring. Consider a soil test to determine any specific nutrient deficiencies.

Water Stress:
Drought stress or inconsistent watering can lead to reduced flowering.
Solution: Ensure that your crape myrtle receives regular, deep watering during dry spells, especially during the growing season.

Disease or Pest Issues:
Diseases or pest infestations can weaken crape myrtles and affect their ability to bloom.
Solution: Inspect your plant for signs of disease or pests and treat as needed with appropriate control measures.

Varietal Differences:
Some crape myrtle varieties may naturally have different flowering patterns or may bloom less profusely than others.
Solution: Understand the typical flowering pattern of your specific crape myrtle variety and adjust your expectations accordingly.

Environmental Stress:
Extreme environmental conditions, such as severe cold snaps or excessive heat, can impact flowering.
Solution: Protect your crape myrtle from extreme conditions when possible and provide proper care to help it recover.

Old Age:
As crape myrtles age, they may naturally produce fewer blooms.
Solution: Consider rejuvenation pruning to stimulate new growth and flowering in older crape myrtles.

By addressing the specific issues affecting your crape myrtle and providing the appropriate care, you can encourage it to bloom and thrive in your landscape.

Proper watering is crucial for the health and growth of Muskogee Crape Myrtles. While watering needs can vary based on factors like climate, soil type, and local weather conditions, here are some general guidelines to help you determine how often to water your crape myrtle:

Establishment Period (First Year): During the first year after planting, Muskogee Crape Myrtles require regular and consistent watering to help establish a strong root system. Water deeply every 7-10 days, especially during dry periods. Ensure that the soil remains consistently moist but not waterlogged.

Subsequent Years (After Establishment): Once Muskogee Crape Myrtles are well-established (usually after the first growing season), they are generally considered drought-tolerant. However, they will benefit from occasional deep watering during dry spells.

Signs of Moisture Stress: Monitor your crape myrtles for signs of moisture stress. If you notice wilting, drooping leaves, or the soil around the plant feels dry to the touch, it's time to water.

Watering Depth: When you water, it's important to provide enough moisture to penetrate the root zone. Water deeply, allowing the water to soak into the soil to a depth of at least 6-8 inches.

Mulching: Applying a layer of organic mulch (e.g., wood chips or shredded bark) around the base of your crape myrtle can help retain soil moisture and regulate soil temperature. Mulch also helps reduce evaporation and weed competition.

Seasonal Adjustments: Adjust your watering schedule based on the season and local weather conditions. Crape myrtles may require more frequent watering during hot, dry summer months and less during cooler, rainy periods.

Rainfall: Consider natural rainfall when determining your watering schedule. If your area receives consistent rainfall, you may need to water less frequently.

Avoid Overwatering: Avoid overwatering, as crape myrtles are susceptible to root rot if the soil remains excessively wet. Ensure that the soil has good drainage.

Morning Watering: Watering in the morning is generally preferable because it allows foliage to dry before evening, reducing the risk of fungal diseases.

Drought Tolerance: Keep in mind that Muskogee Crape Myrtles are known for their drought tolerance once established. It's better to slightly underwater than to overwater these plants.

Remember that the specific watering needs of your Muskogee Crape Myrtles may vary based on your local climate and soil conditions. Regularly monitoring the soil moisture and the plant's condition will help you determine the appropriate watering frequency. The goal is to keep the soil consistently moist but not waterlogged to promote healthy growth and flowering.

Yes, it is generally a good practice to cut off dead or spent blooms from crape myrtles, including Muskogee Crape Myrtles. This process, known as deadheading, offers several benefits:

Promotes Additional Blooms: Deadheading encourages the crape myrtle to produce new flower buds and continue blooming throughout the growing season. It can result in more vibrant and extended flowering.

Enhances Aesthetics: Removing dead or faded blooms improves the overall appearance of the plant, making it look neater and tidier. It also prevents the plant from having a littered or unkempt appearance due to dead flowers.

Prevents Seed Formation: Deadheading prevents the formation of seeds in the spent flowers. While crape myrtle seeds are not typically problematic, removing spent flowers can help conserve the plant's energy for producing more blooms and foliage.

Here's how to deadhead crape myrtles effectively:

1. Use clean and sharp pruning shears or hand pruners.

2. Cut the faded or dead flower clusters just above a set of healthy leaves or buds. Make the cut at a 45-degree angle, leaving a small portion of the stem.

3. Remove all the dead or faded blooms on each branch, working your way through the entire plant.

4. Continue to deadhead throughout the growing season, especially when you notice spent flowers.

5. Avoid heavy pruning or removing significant portions of the plant, especially during the growing season, as this can remove potential flower buds for future blooms.

Deadheading is a simple and effective way to maintain the appearance and encourage the continued flowering of your Muskogee Crape Myrtle. It's best to perform this task regularly, especially after each bloom cycle, to maximize the plant's blooming potential and overall beauty.

Pruning Muskogee Crape Myrtles is an important part of their care and maintenance. Proper pruning helps maintain their shape, improve air circulation, and encourage vigorous growth and flowering. Here are guidelines for pruning Muskogee Crape Myrtles:

1. Pruning Time:
Prune Muskogee Crape Myrtles during late winter or early spring, before new growth begins. This dormant period is ideal for shaping the plant without interfering with the upcoming bloom.

2. Prune for Health and Structure:
Start by removing any dead, diseased, or damaged branches. This helps maintain the overall health of the plant. Thin out crowded or crossing branches to improve air circulation and reduce the risk of disease. Aim to create a well-structured framework with a balanced shape.

3. Remove Suckers and Low Growth:
Crape myrtles often produce suckers or shoots from the base of the plant or at the graft union. Remove these suckers regularly to prevent them from diverting energy from the main plant.
Trim or prune any low, horizontal branches that may obstruct pedestrian traffic or hinder the plant's natural form.

4. Selective Pruning:
Use selective pruning to maintain the desired size and shape of your Muskogee Crape Myrtle. This type of pruning involves removing specific branches to create an attractive silhouette.
To encourage a tree-like growth form, remove lower branches, leaving a single central trunk. Avoid "crape murder" or excessive topping, as it can harm the plant and reduce flowering.

5. Deadheading:
To extend the bloom period and promote continuous flowering, deadhead (remove spent blooms) during the growing season. This encourages the plant to produce new flower buds.
When deadheading, cut the spent flower clusters just above the first pair of healthy leaves beneath the spent blooms.

6. Pruning Tools:
Use sharp, clean pruning shears or loppers for smaller branches and a pruning saw for larger ones. Make clean cuts to minimize the risk of disease entry.

7. Avoid Overpruning:
It's important not to overprune Muskogee Crape Myrtles. These plants naturally have an elegant, vase-like form, and excessive pruning can detract from their natural beauty.

8. Timing for Flowering Impact:
Keep in mind that while pruning during late winter or early spring is ideal for overall plant health, it may reduce the number of early-season blooms. However, this can lead to more compact growth and an extended blooming period later in the season.

Remember that Muskogee Crape Myrtles are known for their stunning blooms, and proper pruning can enhance their overall appearance while ensuring a healthy and well-structured plant. Avoid heavy pruning during the growing season, as it can remove flower buds and delay flowering.

We process and ship your order as quickly as possible, typically within 1-3 business days. You will receive a shipping confirmation with tracking information once your item(s) ship.

We have perfected packaging and shipping plants & trees! That is why we DO NOT use any third-party fulfillment like most other online retailers. Your trees go straight from our farm to your door, safely packaged by our team of seasoned professionals. Our process ensures your plants leave our facility and arrive to your door in the best condition possible!

In cases of extreme cold or hot weather, we may temporarily delay shipping to ensure the well-being of your plants. Our primary focus is on delivering healthy and thriving plants to you. Rest assured, we'll make every effort to notify you of any delays promptly.

Please allow additional ship times during inclement weather and sale periods. We do not process or ship orders on the weekend or U.S. Holidays. Simply Trees is not responsible for delays due to carriers, local disruptions, or weather.

See how we pack your plants!

Learn more about our Shipping Policy

At Simply Trees, we're committed to your satisfaction. If your plants arrive considerably damaged or sustained damage beyond the point of recovery, please contact us within five days at sales@simplytrees.com with clear photos of the entire plant in question for assistance. Our 30-day guarantee covers issues after planting, subject to our terms and conditions. We can't cover plants in the wrong climate or with inadequate care, but we're here to help in other situations. For a detailed understanding of our 30-day guarantee and how we ensure a fair process, click here to learn more.